Izabele Gemeli Rigoa* (izabelegemelirigo@gmail.com) | Daylana Pacheco da Silvaa | Bruna A. Resendea | Matheus Kurya | Carolina B. Andréb | Cínthia P.M. Tabchourya | Marcelo Gianninia | Vanessa Cavallia aState University of Campinas, Piracicaba, Brazil | bFederal University of Minas Gerais, Minas Objectives: The purpose of this experiment is […]
Daily Archives: November 19, 2021
36 posts
António HS Delgadoa* (antonio.delgado.17@ucl.ac.uk) | Paul Ashleya | Anne M. Younga aUCL Eastman Dental Institute, University College London, London, UK Objectives: To compare the penetration depth and polymerization in situ of a novel self-adhesive composite with that obtained using a commercial resin-modified glass ionomer (RMGIC) without an adhesive or a […]
Maryam Hosseini Rivandia* (M.hosseinirivandi@gmail.com)| Alireza Sadrb aMashhad University of Medical Sciences, Mashhad, Iran| bUniversity of Washington, Seattle,USA Objectives: The aim of this research was to assess the shear bond strength of metal brackets bonded to the composite Veneers using different surface preparations. Materials and Methods: One hundred composite disks were […]
Jorge Rodrigo Soto-Monteroa* (jorgerodrigo.soto@ucr.ac.cr) | Beatriz Romanob | Mayara Noronhab | Marcelo Gianninib aUniversity of Costa Rica, Mercedes, Costa Rica | b State University of Campinas, Piracicaba, Brazil Objective: This study evaluated the microtensile bond strength (μTBS) of two resin cements to different types of 3D printed and milled resins […]
Farid El-Askarya* (faridelaskary@asfd.asu.edu.eg) | Abdullah Hassaneinb | Emad Aboalazmb | Nadin Al-Haj Husainc | Mutlu Özcanc aAin Shams University, Cairo, Egypt | bEgyptian-Russian University, Cairo, Egypt | cUniversity of Zurich, Zurich, Switzerland Objectives: This study evaluated the adhesion of photo-polymerized luting-resins to CAD/CAM composite as a function of thickness. Materials […]
Lazaro Vieira de Moraes Netoa* (lazaronetovieira8@gmail.com) | Ana Caroline Lima Colombinoa | Gilberto Antonio Borgesa | Benito Andre Silveira Miranzia | Ana Maria Spohrb | Alexson Lima dos Santosa | Natanael Alves Rolanda aUniversity of Uberaba, Uberaba, Brazil | bPontifical Catholic University of Rio Grande do Sul, Rio Grande do […]
Jonas Rodrigues Meireles Viniciusa* (jonasvmr@gmail.com) | Mariana Gomes Marquesa | Tiago Campos Bastos Moreirab | Renata Marinho Melo Marquesa aSao Paulo State University, São José dos Campos, Brazil | bAeronautics Institute of Technology, São José dos Campos, Brazil Objective: The aim of this study was to develop a thermally compatible […]
Mayara dos Santos Noronhaa* (mysnoronha@gmail.com)| Eduardo Fernandes de Castroa | Marcelo Gianninia aState University of Campinas, Piracicaba, Brazil Objective: This study aimed to evaluate the influence of argon plasma application (APA) on the probability of survival (reliability) and failure mode of CAD/CAM zirconia full crowns, using two different cementation techniques. […]
Amanda Willersa* (amanda.willers@gmail.com) | Vitaliano Netoa | Marcelo Gianninia aState University of Campinas, Piracicaba Objectives: This study investigated the effect of resin cements and CAD/CAM material treatments on shear bond strength (SBS). Two cement systems (RelyX Venner/RV and Panavia V5/V5) and a resin cement using the universal “simplified” technique (Panavia […]
Mona Alhomuoda* (Alhomuod@usc.edu) | Sillas Duarte, Jr.a | Jin-Ho Pharka aUniversity of Southern California, Los Angeles,CA, USA Objective: Evaluate the influence of applying universal adhesive only versus universal adhesive with silane on shear bond strength (SBS) to four different types of lithium disilicate reinforced glass ceramic materials (LDC) using a […]